Placeholder · hero 21:9 · Installer applying dabs of Turbo adhesive to the back of a Dark Grey PET felt sheet laid on a work table

Hardware

Turbo® Adhesive

The adhesive for fixing PET felt and acoustic panels straight to the wall. No frame, no screws.

Shop Turbo® adhesive See where it goes

What it is

The fastest way onto a wall.

Most of our felt goes up with adhesive. It is the quickest fixing and leaves no screw heads in the face.

Turbo® is the adhesive we use for it. Spread it on the back of the sheet, press the sheet to the wall and hold it while it grips.

Order it with your panels, so the fixing is on site when the felt is.

Good to know: adhesive is a permanent fixing. If the panels may need to come off, use our aluminium channels and clips.

Where it goes

Placeholder · 3:2 · Installer smoothing a River Sand PET sheet onto a plastered office wall

Panel Uno sheets straight onto a painted, plastered wall.

Placeholder · 3:2 · Dark Grey grooved PET VG sheets being fixed edge to edge on a reception wall

PET VG sheets butted edge to edge, so the pattern runs on across the joints.

Placeholder · 3:2 · Classroom wall with cut felt hexagons in three colours being stuck on in a pattern

CNC-cut felt shapes stuck on in a pattern across a wall.

Placeholder · 3:2 · PET felt sheet being pressed onto a gypsum board partition in a new office fit-out

Felt and panels on gypsum or wooden partitions.

Also used for pin-up boards, desk dividers, wall tiles and small repairs.

Installation

MLV Sound Barrier: Mass Loaded Vinyl barrier. Dense membrane that blocks airborne noise at the wall level. The primary noise-stopper. 2.5mm Sounds up to 90dB 4mm Sounds up to 120dB
Bass Absorber: High-density acoustic absorber. Kills low-frequency bass vibrations that MLV alone cannot block. Sits inside the wall. 20mm NRC 0.85 40mm NRC 1.00
PET Acoustic Panel: Visible finish layer. Controls room echo, covers the barrier layers, and transforms the wall into a premium interior surface. 9mm NRC 0.30, 100+ designs

Start here

Shop Turbo® adhesive